大型切肉機廠家教你怎樣才能更好的使用這臺機器，達到機器的利用性。
A large meat cutter factory teaches you how to better use this machine to achieve the utilization of the machine.
使用方法
usage method
1.將機器放置在水平的工作場地上,確保機器下邊四腳平穩,可靠,不晃動.檢查切肉板有無雜物,如有異物清理干凈,以免引起刀損壞.對各部件進行檢加油.
1. Place the machine on the horizontal working site to ensure that the four legs under the machine are stable, reliable and free from shaking. Check whether there are foreign matters on the cutting board. If there are foreign matters, clean them up to avoid damage to the knife. Check and oil the parts
2.為確保，必須在接記處可靠接地,電源接頭必須安裝漏電保護器?。?！
2. In order to ensure safety, it must be reliably grounded at the grounding mark, and the power connector must be installed with leakage protector!!!
3.機器工作時，嚴禁將手伸入機器內,在加工過程中勿用濕手按開關。
3. When the machine is working, it is strictly forbidden to put your hands into the machine. Do not press the switch with wet hands during the processing.
4.在進行清理拆卸前，斷開電源，使機器停止運轉
4. Before cleaning and dismantling, first disconnect the power supply to stop the machine
產品優點：
Product advantages:
1 效率高，每分鐘可以切塊120塊。
1 high efficiency, 120 pieces per minute.
2 雙導向推進系統，該系統確保了切塊推進的均勻。
2. Double guide propulsion system, which ensures the uniformity of block propulsion.
3 全自動操作，節省人工成本。
3. Full automatic operation, saving labor cost.
4 防護性能良好。
4. Good safety protection performance.
5 不銹鋼機殼，整體縫焊。
5 stainless steel case, whole seam welding.
6 該機可以切出粗卷，細卷，長卷，直塊等多種卷型，一機多用。
This machine can cut many kinds of roll types, such as thick roll, fine roll, long roll, straight block, etc.
7 該商用全自動 大型切肉機是直切機行業里真正能立著切肥牛板的機器。
This commercial full-automatic large-scale meat cutter is a machine that can cut beef plate in the straight cutting machine industry.
8 零下18度的肉卷不用解凍即可上機切塊，肉塊不碎而且成型整齊美觀。
The meat roll of 8-18 degrees can be cut into pieces without thawing. The meat pieces are not broken, and the shape is neat and beautiful.
9 所有切割零件都易于清洗，并且不用工具即可進行拆卸安裝。
All cutting parts are easy to clean and can be disassembled and installed without tools.
10 不用磨刀，獨特的設計省去了用戶磨刀的麻煩，并大大降低了用戶的使用成本。
No need to sharpen the knife, the unique design saves the user the trouble of sharpening the knife, and greatly reduces the user's cost.
清洗方法：
Cleaning method:
1、往切塊機附帶的滾筒內注入一定量的水，用水將其中的廢屑排出；
1. A certain amount of water is injected into the drum attached to the cutter, and the waste chips are discharged with water;
2、用軟布或者軟刷子沾有兌著洗滌劑的水擦拭，然后用清水沖洗干凈；
2. Wipe with a soft cloth or a soft brush with water mixed with detergent, and then rinse with water;
3、調入一定量的洗滌劑或者是劑在水里面加入桶內，將桶轉動清洗；
3. Add a certain amount of detergent or disinfectant into the bucket, and rotate the bucket for cleaning;
4、清洗結束后，再用高壓水槍清洗桶內，并且簡單轉動桶，使泄水孔朝下，排盡桶內的水。
4. After cleaning, clean the barrel with high-pressure water gun, and simply rotate the barrel to make the drain hole face down to drain the water in the barrel.
在多用大型切肉機清洗的過程中，我們要避免用水直接噴沖牛羊肉切塊機的軸承座，電氣箱控制面板的一些角落里也盡量不要使其接觸到水，因為這樣可以延長羊肉切塊機的使用壽命。
In the process of multi-purpose large-scale meat cutter cleaning, we should avoid directly spraying water on the bearing seat of beef and mutton cutting machine, and try not to contact water in some corners of the electric box control panel, because this can prolong the service life of the mutton chopper.
That's how to use a large meat cutter. Have you learned it? For more information, please click the website to leave a message: 。
